Eucalyptus Veneer Dryer-manufacture,factory,supplier from China

First: the type of wood to be dried, whether poplar, pine, eucalyptus, or rubber wood.Second: The thickness and size of the dried veneer, such as 1.7 or 2.2 thickness, four-piece or three-piece, etc.Third: What is the moisture content requirement and output after drying, how much water needs to be dried, and how many square meters or boards need to be dried in one day.Fourth: Workshop size and heat sourceAfter determining these points, the model of veneer dryer you need can be determined.

The double-layer 30-meter-equipped 4-ton burner purchased by our customer in Zimbabwe has been installed and is currently in operation. The customer is using it to dry pine and eucalyptus wood with a thickness of 2.45mm. The feedback is that the effect is very good, and the production capacity will be expanded in the future. Will continue to purchase. We are very grateful to our customers for their trust in us. If you also want to know more product information, we welcome you to contact us at any time!This dryer adopts new technology.

Our Zimbabwean customer purchased a 2 deck 30 m with 4 tons of burning machine is currently in operation, the customer is used to dry pine and eucalyptus 2.45mm thick, the feedback is very good, the later expansion of production capacity will continue to purchase.

The Latvian customer bought our 4 deck veneer dryer and biomass burner, which is automatic board loading and semi-automatic board collecting to save labor cost, and the dried veneer is smooth without wrinkles, with good effect. We have a professional r & D team, can design different models according to the special requirements of customers, if you need to feel free to contact us.

After purchasing one of our veneer dryers, our Zimbabwean customers have recently purchased a second veneer dryer , which is currently being installed, along with our biomass burners, by our engineers The installation is carried out under the guidance, and the customer feedback is very good. If there is a need in the future, we will continue to buy our equipment. Thank you for your trust in us.

1. Operating system:The planed (rotary) veneer is fed from the feed port of the wind-jet roller type veneer dryer, and through the relative rotation of several pairs of upper and lower rollers inside the dryer, the planed and rotary-cut veneer is rotated in the predetermined direction. Front running, during the veneer traveling process, the hot air of 110-150 degrees Celsius is vertically sprayed to the upper and lower surfaces of the veneer at the wind speed of V=1.5M/S through the air nozzle installed between the two pairs of rollers.

The 2 deck 48 m veneer dryer and 6-ton burner purchased by our customers in Phechabun Province, Thailand, are being installed. Our engineers went to the customer's factory to guide the installation, and the engineers returned only after the equipment could be used normally. The customer used eucalyptus wood for drying, and the customer gave good feedback. Thank you very much for the trust of our customers, we will continue to work hard to do better! If you also have needs, please contact us!

Recently, due to the impact of the epidemic, many customers were unable to go to the site to see the equipment. We organized an online viewing site, and our engineer gave a comprehensive explanation of the veneer dryer in live video. Finally, the questions raised by customers were all Answer one by one, if you also want to see the scene of equipment operation, please feel free to contact us.

In 2020,a friend from Singapore successfully cooperated with us.This is a friend from a long time ago.After adding our contact information,he became very interested in our veneer dryer,but he was worried about the output of the machine.never negotiated a cooperation,and finally,after visiting our factory,the customer dispelled his concerns and showed great interest in our patented biomass burning furnace,because this furnace can reasonably use the scraps from the rotary cutting Combustion,rational use of resources,and will not produce environmental pollution,smog and other effects,and finally

The roller veneer dryer can dry various types of veneers, including softwood, hardwood, bamboo, etc. (such as some common wood types such as eucalyptus, birch, poplar, pine, spruce, oak, maple, Walnut, teak, etc.). It should be noted that different types of wood have different fiber structures, densities, moisture content and other characteristics. Therefore, when using a roller veneer dryer to dry wood, it is necessary to set appropriate parameters according to the characteristics of different wood to ensure Drying results and quality. and perform proper maintenance and upkeep on the machine.